STV200/400K Surge Protective Devices

SolaHD STV 200/400K Series offers continuous protection from damaging voltage transients and electrical noise commonly found at the service entrance or distribution panel. The modular design of the STV 200/400K allows for installation flexibility and its’ robust design allows for installation in the most severe exposure locations. They are capable of handling the high-impulse, potentially damaging transients commonly found at the service entrance or distribution panels.

Learn about Sola/Hevi-Duty STV200/400K Surge Protection

STV100K Hardwired Surge Series

Sola/Hevi-Duty’s STV100K series Surge Protection Device (SPD's) is a hard wired SPD designed to be installed at the service entrance, branch panels or dedicated sensitive electronic loads. These surge protector feature all mode protection, LED and audible alarm status indication, sinewave tracking and Form C dry contacts.

Learn about Sola/Hevi-Duty STV100K Hardwired Surge Series

STV25K DIN Rail Series

This series provides point-of-use protection, at the dedicated equipment level, against damaging transients. Ideal for installation in electronic control cabinets found in harsh industrial environments such as the factory floor or at remote locations. These devices provide 50,000 amps of surge protection, sinewave tracking, LED status indication and form “C” dry contacts.

Learn about Sola/Hevi-Duty STV25K DIN Rail Series

STFE Elite DIN Rail Series

The SolaHD STFE Elite DIN Rail Mount Series combines Active Tracking® technology with UL Listed surge protection to protect against the full spectrum of voltage transients and surges. It continuously tracks the input AC power line responding instantly into action upon detecting extraneous high frequency noise and high voltage transients caused by everyday events such as turning on machinery, motors, or equipment.

Learn about Sola/Hevi-Duty STFE Elite DIN Rail Series

STFV Plus Series

The Sola STFV Plus Series combines Active Tracking® filtration for low energy noise and surge suppression for high energy transients. It continuously tracks the input AC power line responding instantly into action upon detecting extraneous high frequency noise and high voltage transients caused by everyday events such as turning on machinery, motors, or equipment.

Learn about Sola/Hevi-Duty STFV Plus Series

STF Series Active Tracking Filters

Long Term Protection Against Damaging Low Voltage/High Frequency Noise. The STF Series offers original active tracking technology to guard against, low voltage/high frequency energy transients. Electrical noise caused by everyday events—for example, turning on machinery, motors or equipment—can be very damaging over time. STF Active Tracking® Filters protect your equipment by continuously tracking the input AC power line and eliminating electrical noise using a low-pass or L-C filter consisting of a series of load dependent inductors, capacitors and resistors. Sized appropriately to handle the maximum current draw on the line, these filters are capable of absorbing a large bandwidth of noise.

Learn about Sola/Hevi-Duty STF Active Tracking Filters

STC-PoE Series

The Sola STC-PoE Series is designed to work on Cateogroy 5 PoE transmission lines as well as Category 6 applications. They feature both female to female and male to female RJ-45 connection options for ease of installation.

Learn about Sola/Hevi-Duty STC-PoE Series

STC-DRS Series DIN Rail Protection

The Sola STC-DRS Series is a DIN Rail mountable, single pair surge protection module implementing three-stage hybrid technology. This module addresses over-voltage transients with gas tubes and silicon avalanche components. In addition, sneak currents are mitigated with resetable fuses (PTCs). The PTC increases resistance by several orders of magnitude when over currents exceed safe levels.

Learn about Sola/Hevi-Duty STC-DRS Series

STC-642 Series Data/Signal Line Protection

The STC-642 Series of Surge Protection Devices are dual pair (four wire) modules using three-stage hybrid technology. This module addresses over voltage transients with gas tubes and silcon avalanche components. In addition, sneak and fault currents are mitigated with resetable fuses (PTCs). The PTCs increase resistance several orders of magnitude when over currents exceed safe levels.

Learn about Sola/Hevi-Duty STC-642 Series

STC-CCTV Coax Series

Tailored specifically to CCTV, data, audio and cable applications, these units are single Coax Surge Protection Devices implementing three-stage hybrid technology. They address overvoltage transients with a primary gas discharge tube (GDT), and secondary silicon avalanche diode (SAD) components.

Learn about Sola/Hevi-Duty STC-CCTV Coax Series

STC-TEL Series-RJ Connection Protection

The Sola STC-TEL Series are single pair telephone or Data Line Protectors that use an advanced two-stage hybrid design. These units address over voltage transients with silicon breakover devices, while sneak and fault currents are mitigated with PTC technology, which consist of solid state resetable fuses.

Learn about Sola STC-TEL Connection Protection